If you sell disposable plastic cups or lids into the EU, the product is a food contact material (FCM), and several layers of regulation apply. Here is the short, practical version.
1. The framework: Regulation (EC) No 1935/2004 This is the umbrella regulation for all food contact materials. It requires that materials do not release substances harmful to health, do not change the composition of food unacceptably, and do not deteriorate. It also sets labeling and traceability duties: the article must be identifiable as food contact material and traceable one step back in the supply chain.
2. The specific measure: Regulation (EU) No 10/2011 This is the regulation that matters most for plastic cups and lids. It applies to plastic articles, plastic layers in multi-material articles, and plastic lids. Key elements:
- Positive list: only substances authorised on the Union list (Annex I) may be used, and only within their stated restrictions.
- Overall migration limit (OML): the total substances released must not exceed 10 mg per dm² of surface or 60 mg per kg of food.
- Specific migration limits (SML): individual substances have their own limits, and testing conditions depend on the intended use, including time and temperature.
- Declaration of Compliance (DoC): the supplier must provide a written DoC confirming conformity for the intended use, including the food contact surface area-to-volume ratio and the use conditions.
3. GMP: Regulation (EC) No 2023/2006 Good manufacturing practice for food contact materials. It covers quality assurance, documented processes and traceability at every production step.
4. Testing: simulants and conditions Migration is not tested with real drinks but with food simulants, chosen according to the type of food or drink, under defined time and temperature conditions. Ask for test reports from an accredited laboratory, and check that the conditions match how the cup is actually used. A cold drink cup and a hot-fill cup are not tested the same way.
5. Recycled plastic: Regulation (EU) 2022/1616 If you offer rPET cups, the recycled content must comply with this regulation on recycled plastic food contact materials. Ask the supplier for the relevant authorisation and recycling process documentation.
6. What 10/2011 does not cover Printing inks, adhesives and coatings fall outside 10/2011. Inks are typically assessed under national rules and industry guidance, and the lid is a separate food contact article that must meet the same requirements as the cup. A compliant cup with an unassessed ink or lid is not a compliant article.
What to request from your supplier
- A Declaration of Compliance referencing EU 10/2011
- Migration test reports from an accredited laboratory
- A statement of the materials and substances used
- A GMP declaration
Traceability information, plus the recycler's authorisation for rPET
Wuhan Espak Packaging Co., Ltd supplies food-contact disposable cups and matching lids for the EU market and can provide DoC and migration test documentation. Contact our sales team or visit https://espak.en.alibaba.com/company_profile.html for compliance files and samples.

